Energy Act Outlaws Many Incandescent Reflector Lamps
Reflector lamp types are directional lamps—spots, floods, etc.—popular in recessed downlighting and track lighting applications, both residential and commercial.
While general-service incandescent lamps have received the most attention in media coverage of the Energy Independence and Security Act (EISA) of 2007, with provisions beginning to take effect in 2012, many popular incandescent reflector lamps are being outlawed this month.
A variety of proven substitutes is available for eliminated lamps, including halogen, compact fluorescent and incandescent exceptions.
What the Act requires: Minimum efficacy standards established for incandescent reflector lamps by the Energy Policy Act of 1992 now apply to a larger group of reflector lamps, creating a national standard matching stricter standards enacted by nine states since 2006.
In short, the Act covers incandescent and halogen reflector lamps greater than 2.25 inches in diameter, including R, PAR, BPAR, BR (BR30, BR40) and ER (ER30, ER40) lamps.
After the effective date (June 16, 2008 is the intended effective date, say manufacturers), these lamp types will have to demonstrate a minimum efficacy, expressed in lumens of light output per watt of electrical input (lumens/W) as shown in Table 1, or no longer be manufactured in the U.S.
Any product manufactured prior to the effective date, even if it does not meet the Act's requirements, may continue to be sold until inventories are depleted.
Table 1. EISA 2007 requirements for incandescent reflector lamps.
WattageRange
Minimum Lumens/W
40-50W
10.5
51-66W
11.0
67-85W
12.5
86-115W
14.0
116-155W
14.5
156-205W
15.0
Exceptions: Exemptions include <50W BR30, BR40, ER30, ER40; <45W R20; and 65W BR30, BR40 and ER40 lamps.
Analysis: According to Brian Vedder, product manager-halogen fro Philips Lighting, the most popular lamps being eliminated include 50W and 75W R20 and 85W BR30 lamps, and the most popular exceptions are 65W BR30 and BR40 lamps. According to Vedder, colored lamps and lamps designed for "vibration service" or "rough" applications are also exempt.
Lamp manufacturers have begun publishing substitution guides to help distributors navigate compliant alternatives for lamps being phased out. Substitutions include halogen, compact fluorescent and incandescent exceptions. Tables 2 and 3 provide several examples. Note, however, that dimmable compact fluorescent products available at the time of writing exhibited performance issues during dimming, which may disqualify compact fluorescent for applications involving dimming.
Table 2. Examples of substitutions recommended by GE Lighting.
Lamp Type
Eliminations
Substitutions
R20
50W and 75W R20
Halogen PAR20 and R20 or incandescent 45W R20
R40
90W and 120W R40
Halogen PAR38 (maintain same light output) or incandescent 65W R40 (less light output)
